The OBD Fix - C8 Corvette - Including Base, E-ray, GS/GSX, Z06, and ZR1/ZR1X

The 2M Fabrication OBD Fix is here. The only product specifically designed to allow you to run high flow cats or a catless setup without triggering your CEL. 

The OBD Fix works by specifically targeting ONLY the CEL codes associated with the cats/rear o2 sensors:
- P0420
- P0430
- P0421
- P0431

It will not suppress any other CELs, so you don't have to worry about missing important codes for any other reason. 

How to use:

Step 1: Ensure that you have cleared all codes from your vehicle. You cannot have any pending codes or permanent codes stored in your ECU. The OBD Fix will NOT target permanent codes, so these need to be resolved prior to use. Keep The OBD Fix unplugged.

Step 2: As soon as you get your first CEL, leave your vehicle running and plug in The OBD Fix. It will flash a green light and clear the CEL for you. Leave it plugged in at all times to keep the pending Emissions CEL suppressed. 

Step 3: If you get another CEL, unplug The OBD Fix for 10 seconds and plug it back in while the vehicle remains running. The OBD Fix will now recognize the additional pending code and take care of it for you. The Unplug/Plug procedure can be done at any time. Reminder: The OBD Fix will ONLY target the above 4 codes, so if you have a CEL that does not turn off when using The OBD Fix, you will need to scan the vehicle to see if you have a different issue occurring. 

The OBD Fix is best purchased at the same time as you purchase your headers/sport cats/cat deletes so that you do not run the risk of a permanent code being stored in your ECU. 

NOT FOR SALE OR USE IN THE STATE OF CA.